MyWifiExtUncategorizedWifi Range Extender

Strong Wi-Fi Range Extender 1600: Cover All Your House With This Extender

Wi-Fi Range Extender 1600

The Internet is mostly used through a wireless medium because it is not viable to sit at one place and connect devices to the modems using cables and wires. There are many wireless range extenders available on the market these days, but there are only a few that provide a decent internet coverage. Strong Wi-Fi Range Extender 1600 is one of those, as it allows you to cover the entire house. Moreover, installing and configuring this Wi-Fi extender is a Wi-Fi range extender is quite easy.

You must have already noticed that the further you get away from your internet box, the weaker the Wi-Fi signal. It can also come from the configuration of your home or its structure because thick load-bearing walls slow down the diffusion of the signal.

When we put the box in a room, it does not move anymore. We must find a solution to extend its signal to the “gray areas” of the home. Well, it is all covered with this amazing ‘Strong’ Range Extender 1600 Wi-Fi Repeater.

A minute installation

The big advantage of this wifi extender is the simplicity of its configuration. It uses the WPS protocol, which allows connecting wireless devices to its box easily and safely. It is not necessary to enter the network name or security key. Things will be carried out in a much smoother way in this Wi-Fi extender.

Operating this Wi-Fi extender is as easy as it gets. Place the device in one of the rooms of your house, and then connect it to the mains. The boot process takes three good minutes. When the green LEDs on the front panel turn on and off for 4 seconds, the extender is waiting for configuration.

Hold the WPS button on the box for a moment followed by Range Extender; here, everything is in place. Strong’s small extender covers about 70 m², without you having to change the name of your Wi-Fi network.

If your box does not have the WPS function, you must do otherwise. It’s a little longer but just as simple. From your computer (PC or Mac), tablet or smartphone, connect to the wireless relay network as if you were connecting to a conventional Wi-Fi network. Open a page in your browser, enter either http://extender1600.local or 192.168.2.254 and follow the on-screen instructions to configure the device.

A small multifunction station

Thanks to the diversity of its connectivity, you can, for example, connect the extender to your hi-fi system (RCA cable to mini-jack). You will be able to broadcast stored or “streamed” music from your mobile device. This is something that was not possible in other Wi-Fi extender systems.
The USB 3.0 port allows you to connect storage devices (hard disk and USB key) to share the contents between home computers connected to the network. It is also possible to share a printer. Finally, if the rate of your box is enough, you will even be able to play an ultra-high definition video file (UHD) on your computer. Too bad, there is not an application to do the same on mobile devices! Had there been an application for mobile devices, then it would have been a lot better.

Leave a Reply

Your email address will not be published. Required fields are marked *